150mm (6") digital depth gauge with internal step measuring hook. The base is 100mm (4") wide. The clear and easy to read display can be set to zero in any position,
metric or imperial display and auto shut off. External data output interface via data cable (not supplied).
The additional versatility of the measuring hook allows this gauge to be used to measure thickness, internal steps on a work piece and access other restricted features. The hook is precision ground and hardened, to a thickness of 2mm. The gauge is easy to calibrate, by closing the gauge so the hook is in contact with the caliper base and pressing zero. When a thickness or internal step dimension is measured a direct reading can taken from the display. If a depth measurement is taken 2 millimeters will need to be added to the displayed value. If the gauge is solely used for the purpose of depth measurement the hook can be cut off and removed permanently.
Included with the gauge: Storage case, Battery and Instructions.
Measuring Range: 2-150mm (6 inch) Resolution: 0.01mm (0.0005") Base Width: 100mm (4 inch) LCD Display: 7mm character height Battery:1.55V SR44 Working Temperature: 0 ~ +40C
