Rotary Angle Encoder and Remote Display, with a 6mm diameter shaft.

Rotary angle encoder with a remote LCD display with a resolution of 0.1 degrees. The remote display has the on/off button and a zero function button allowing the display to be set to zero degrees in any position. The gauge is powered by a standard CR2032 battery located behind a twist lock compartment on the rear of the display.

The Display is linked to the rotary encoder by a 910mm (36") cable with an in-line socket and plug. This allows the display and encoder to be disconnected. The rotary encoder has a flat steel flange with four mounting holes and 6mm diameter shaft.

Please Note: The rotary encoder must not be used at high speed/rpm. Protect encoder from coolant and moisture ingress.

Included with the gauge: Remote LCD display, Rotary Encoder and Battery.

Range: 0-360 degrees
Resolution: 0.1 degrees
Accuracy: +/- 0.1 degrees
LCD Display: 10mm character height
Encoder Shaft Diameter: 6mm
Battery: 3.0V CR2032
Working Temperature: 0 ~ +40C