AWE 120 Series 2500mm Travel Draw Wire Encoder - Quadrature Output

Part No
DRO-AT-AWE120-3-2500-T33
Place On Back Order Now or Please Contact Us For Stock Details
M-DRO
£232.20
Overview
The AWE 120 series draw wire encoder with 2500mm (98 inch) travel. This type of encoder operates via sprung loaded stainless steel wire, as this wire is wound or unwound from the reel a quadrature encoders outputs a linear distance travelled. Simple mounting with threaded stud on the draw wire and M4 T slots on four sides of the main body. Also known as Draw wire transducers, cable transducers or string encoders.
  • A compact draw wire encoder with 2500mm travel
  • Quick and easy installation without the need for linear guidance
  • Resistant to shocks and vibration
  • Stud mounting on draw wire and m4 threaded mounting holes in the base of the body
  • Industrial standard quadrature output (other options also available)
  • High operating speed 0.5m/s
  • High strength stainless steel wire with a diameter of 0.5mm
  • Resolution: 0.04mm (final resolution calibration required on install)
  • Quadrature output (potentiometric, voltage 0-10v or current 4-20mA options available)
  • Linearity: ± %0.25 full scale

Applications include: wood, glass or stone cutting machinery, telescopic cranes, reach trucks, forklifts, lifting platform equipment, elevators, material handling, hydraulic cylinder position measurement, pipe bending machines, factory automation and robotic process control.


 

Key Specifications

Rod end thread: M8

2.4N maximum retraction force

3m cable with flying leads (contact us for connector options)

Compatible with DRO-MG-PDU-1X and DRO-MG-MDU-1UN display consoles, please contact us for further asistance

More Information
Weight(g)1405.000000
TypeTravel Draw Wire Encoder
BrandM-DRO
MPNDRO-AT-AWE120-3-2500-T33
GTIN5056202938943
Conditionnew
Write Your Own Review
You're reviewing:AWE 120 Series 2500mm Travel Draw Wire Encoder - Quadrature Output
Your Rating
Customer Questions
Hello, Can you please send me wiring information for this draw wire encoder. What voltage is required? What are the output signals? What is the IP rating? Thank You.
Thank you for your enquiry. Please see details below. Operating voltage: 5V Output signals: quadrature TTL (5V) IP Rating: IP53 (IP67 available) Also available are 4-20mA and 0-10V outputs. Many thanks.
Did you find what you were looking for?