Calculated Industries 4088 Advanced Machining Math Calculator with Materials

Part No
ME-CALC-4088
Rating:
100% of 100
In stock
Calculated Industries
£70.37
Overview
Advanced Machining Math Calculator with Materials
  • The Machinist Calc Pro 2 now includes materials and tool settings combined with DOC and WOC to solve all your speed and feed calculations for face, end or slot milling plus turning, drilling and boring
  • It also gives you step-saving drill and thread chart look-ups, right triangle solutions, bolt-circle patterns, a larger 2-line LCD display and much more all built into a portable, rugged and cost-effective handheld calculator
  • Includes a rugged shock, dust and moisture resistant Armadillo Gear protective case
  • Some dedicated features - Speeds and Feeds - Calculate for Milling, Turning, Boring and Drilling; Spindle Speed (RPM), Feed Rate (IPM), Cut Speed, Cut Feed, Feed per Tooth, Number of Teeth and Radial Chip Thinning adjustment factor
  • Other dedicated features - Thread Sizes, Drill points, Drill sizes, 3-wire measure, trigonometric functions, right triangle math
  • Size: 6.25" x 3.5" x 0.9" (160 mm x 90 mm x 25 mm)
  • Product Weight - approximately 170g
  • Power: One 3-volt (CR2025) Long-life Battery
  • Display Type: 12 Digits (8 normal, 4 fractions) with full annunciators
  • Display Dimensions: 0.813" x 2.5" (21 mm x 65 mm)

Built-in Functions and Calculations:

  • New - Machining-specific keys to enter or calculate Surface Feet per Minute (SFM), Inches per Tooth (IPT), Inches per Minute (IPM), Inches per Revolution (IPR), # of Teeth, Depth of Cut (DOC), Width of Cut (WOC) and Length of Cut (LOC)
  • New - Materials - Choose from 20 popular Materials
  • New - Processes - Face Milling, End Milling, Slot Milling, Turning, Boring, Drilling
  • New - Tools - High Speed, Carbide and High Performance
  • Speeds and Feeds - calculate for milling, turning and drilling; cutting speed, spindle speed (RPM), feed rate (IPM), cutting feed, feed per tooth/chip load, number of Teeth and Radial Chip Thinning adjustment factor
  • Built-in Drill and Thread Size Tablessave time and steps (Compliant with ANSI/ASME B1.1-2003 and ANSI/ASME B1.13M-2005)
  • Enter Numeric, Fractional, Metric Thread Sizes and Drill Sizes - and display tap, roll tap, close and free fit drill sizes plus pitch, major and minor diameters
  • Right Triangle Math - plus trigonometric functions
  • Drill Points - enter the cutting angle and drill size to calculate the drill point cut depth
  • Bolt Pattern Layouts - enter start angle, number of bolts, diameter and optional x, y offset; calculate x and y coordinates. Find center-to-center spacing for bolt pattern layouts
  • 3-Wire Measure - enter Wire Size (or use calculated Best Wire size) and 3-Wire Measurement to calculate pitch diameter


 

Key Specifications

Accuracy: 12 Digit Internal Accuracy

Please Note - This Calculator is an American device and the some units of measurement may refer to the US measurements.

More Information
Weight(g)319.000000
TypeMachinist Calculator
BrandCalculated Industries
MPN4088
GTIN5055396143690
Conditionnew
Write Your Own Review
You're reviewing:Calculated Industries 4088 Advanced Machining Math Calculator with Materials
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?