Shopping Basket

0 item - £0.00

You have no items in your shopping cart.

All DRO Kits

All DRO Kits

All DRO Kits

  1. Part No:DRO-012-L72-MM
    £439.99 ( £366.66 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit design to the Myford ML7 and Super 7 hobby lathe with integrated cross slide encoder. The cross slide encoder requires the cross slide to be removed. To allow a block to be fitted to the end and a slot machining in the underside. All other mountings do not require any drilling or modification to the lathe. Step by step install guide. Suitable for the standard bed length.
  2. Part No:DRO-NE-03-013
    £537.60 ( £448.00 Ex. VAT)

    Pre Order Now and Save 5% or Please Contact Us For Stock Details

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Colchester Master, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 25" between centre lathe.
  3. Part No:DRO-NE-03-014
    £561.60 ( £468.00 Ex. VAT)

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Colchester Master, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 40" between centre lathe.
  4. Part No:DRO-NE-03-015
    £537.60 ( £448.00 Ex. VAT)

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Colchester Triumph 2000, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 30" between centre lathe.
  5. Part No:DRO-NE-03-016
    £585.60 ( £488.00 Ex. VAT)

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Colchester Triumph 2000, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 50" between centre lathe.
  6. Part No:DRO-NE-03-017
    £537.60 ( £448.00 Ex. VAT)

    Pre Order Now and Save 5% or Please Contact Us For Stock Details

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Colchester Chipmaster, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 20" between centre lathe.
  7. Part No:DRO-250-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Myford 254 lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 550mm between centre model.
  8. Part No:DRO-120-M72-MM
    £425.00 ( £354.17 Ex. VAT)

    Mill not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools Eagle 25 milling drilling machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 585mm x 190mm table.
  9. Part No:DRO-130-M72-MM
    £425.00 ( £354.17 Ex. VAT)

    Mill not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools Eagle 30 milling drilling machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 730mm x 210mm table.
  10. Part No:DRO-140-M72-MM
    £425.00 ( £354.17 Ex. VAT)

    Mill not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools Lux milling machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 820mm x 240mm table.
  11. Part No:DRO-015-L72-MM
    £469.99 ( £391.66 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit design to fit directly onto the Super 7 long bed hobby lathe. The DRO kit will simply bolt on with NO DRILLING required and uses some of the existing fixings on the machine. Step by step guide for a quick install. Suitable for the long bed length.
  12. Part No:DRO-NE-03-010
    £525.00 ( £437.50 Ex. VAT)

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Myford Super 7, Sigma and Connoisseur lathe the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest workshop conditions. Suitable for the 20" between centre lathe.
  13. Part No:DRO-270-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Colchester Chipmaster lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 20 inch between centre model.
  14. Part No:DRO-290-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Colchester Bantam lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 20 inch between centre model.
  15. Part No:DRO-295-L72-MM
    £437.00 ( £364.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Colchester Bantam lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 30 inch between centre model.
  16. Part No:DRO-BR-525
    £39.95 ( £33.29 Ex. VAT)

    The upgrade replaces the bolt on cross slide encoder supplied in the M-DRO Myford digital readout kit with an imbedded magnetic tape and extension piece. Which frees up the left side of the cross slide and allows better access to the saddle locking bolt. This will involve tapping the cross slide with two M6 fixings and machining a slot 2mm deep by 10mm wide and 180-200mm in length.
  17. Part No:DRO-NE-03-012
    £561.60 ( £468.00 Ex. VAT)

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Colchester Student, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 40" between centre lathe.
  18. Part No:DRO-NE-03-011
    £537.60 ( £448.00 Ex. VAT)

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Colchester Student, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 25" between centre lathe.
  19. Part No:DRO-NE-03-009
    £666.00 ( £555.00 Ex. VAT)

    Mill not included. DRO kit only. 3 axis kit with quill encoder mounting brackets. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Bridgeport Mill, the NMS300 DRO System includes Newall’s Spherosyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 42" table.
  20. Part No:DRO-KIT-70
    £385.00 ( £320.83 Ex. VAT)

    2 axis mill function digital readout package with two magnetic encoders. The encoders offer a very compact profile size and can be cut to any length to custom fit the machine being installed. The package is suitable for a range of mills including smaller bench top to larger industrial machines. If the machine is no larger than a 42" Bridgeport milling machine this kit would be suitable. If your machine has a longer table or travel please contact us. The kit includes a universal bracket set which offers a wide range of mounting configurations.
  21. Part No:DRO-KIT-80
    £385.00 ( £320.83 Ex. VAT)

    2 axis lathe function digital readout package with two magnetic encoders. The encoders offer a very compact profile size and can be cut to any length to custom fit the machine being installed. The package is suitable for a range of lathes including mini bench top lathes to larger industrial machines. If the machine is no larger than a 30" between centres this kit would be suitable. If your machine has a longer bed or travel please contact us. The kit includes a universal bracket set which offers a wide range of mounting configurations.
  22. Part No:DRO-KIT-81
    £520.00 ( £433.33 Ex. VAT)

    3 axis lathe function digital readout package with three magnetic encoders. The encoders offer a very compact profile size and can be cut to any length to custom fit the machine being installed. The package is suitable for a range of lathes including mini bench top lathes to larger industrial machines. If the machine is no larger than a 30" between centres this kit would be suitable. If your machine has a longer bed or travel please contact us. The kit includes a universal bracket set which offers a wide range of mounting configurations.
  23. Part No:DRO-KIT-71
    £520.00 ( £433.33 Ex. VAT)

    3 axis mill function digital readout package with three magnetic encoders. The encoders offer a very compact profile size and can be cut to any length to custom fit the machine being installed. The package is suitable for a range of mills including smaller bench top to larger industrial machines. If the machine is no larger than a 42" Bridgeport milling machine this kit would be suitable. If your machine has a longer table or travel please contact us. The kit includes a universal bracket set which offers a wide range of mounting configurations.
  24. Part No:DRO-010-L72-MM
    £439.99 ( £366.66 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit design to fit directly onto the Myford ML7 and Super 7 hobby lathe. The DRO kit will simply bolt on with NO DRILLING required and uses some of the existing fixings on the machine. Step by step guide for a quick install. Suitable for the standard bed length.
  25. Part No:DRO-050-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools DB10 Super (B) model lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 550mm between centre model. Please note this kit is suitable for the cross slide with the T slots set inwards 15mm from the edge.
  26. Part No:DRO-030-M72-MM
    £425.00 ( £354.17 Ex. VAT)

    Mill not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools Champion 16V milling machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 500mm x 140mm table. With minimal modification this kit would also fit the Warco WM14.
  27. Part No:DRO-100-M72-MM
    £425.00 ( £354.17 Ex. VAT)

    Mill not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools Champion 20V milling machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 700mm x 180mm table. With minimal modification this kit would also fit the Warco WM18
  28. Part No:DRO-NE-03-001
    £537.60 ( £448.00 Ex. VAT)

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Colchester Bantam, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 20" between centre lathe.
  29. Part No:DRO-NE-03-008
    £645.60 ( £538.00 Ex. VAT)

    Mill not included. DRO kit only. 3 axis kit with knee encoder mounting brackets. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Bridgeport Mill, the NMS300 DRO System includes Newall’s Spherosyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 42" table.
  30. Part No:DRO-NE-03-007
    £542.40 ( £452.00 Ex. VAT)

    Mill not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Bridgeport Mill, the NMS300 DRO System includes Newall’s Spherosyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 42" table.
  31. Part No:DRO-NE-03-006
    £561.60 ( £468.00 Ex. VAT)

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Harrison M300, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 40" between centre lathe.
  32. Part No:DRO-NE-03-005
    £537.60 ( £448.00 Ex. VAT)

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Harrison M250, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 25" between centre lathe.
  33. Part No:DRO-NE-03-004
    £561.60 ( £468.00 Ex. VAT)

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Harrison M250, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 30" between centre lathe.
  34. Part No:DRO-NE-03-003
    £537.60 ( £448.00 Ex. VAT)

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Harrison M250, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 20" between centre lathe.
  35. Part No:DRO-NE-03-002
    £561.60 ( £468.00 Ex. VAT)

    Pre Order Now and Save 5% or Please Contact Us For Stock Details

    Lathe not included. DRO kit only. Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Colchester Bantam, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 30" between centre lathe.
  36. Part No:DRO-302-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Boxford MKII and MKIII Model A, Model B and Model C engineers lathe with the T slotted cross slide. A specific kit that integrates the cross slide encoder, to install the encoder the cross slide will need to be removed. To allow a block to be fitted to the end and a slot machining in the underside. Complete kit with CNC machined brackets and step by step, full colour install guide to assist with the installation.
  37. Part No:DRO-300-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Boxford MKII and MKIII Model A, Model B and Model C engineers lathe with the T slotted cross slide. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. An easy fit cross slide option with the encoder bolting on from the top face.
  38. Part No:DRO-225-M72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools Centurion 3 in 1 combination mill and lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 800mm between centre model long bed.
  39. Part No:DRO-056-L72-MM
    £445.01 ( £370.84 Ex. VAT)

    Pre Order Now and Save 5% or Please Contact Us For Stock Details

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools DB10 Super MKII long bed model lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 750mm between centre model. Please note this kit is suitable for the cross slide with the T slots set inwards 8mm from the edge.
  40. Part No:DRO-051-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Pre Order Now and Save 5% or Please Contact Us For Stock Details

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools DB10 Super MKII model lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 500mm between centre model. Please note this kit is suitable for the cross slide with the T slots set inwards 8mm from the edge.
  41. Part No:DRO-100-M73-MMM
    £534.00 ( £445.00 Ex. VAT)

    Mill not included. DRO kit only. The M-DRO 3 axis DRO kit custom designed to fit onto the Chester Machine Tools Champion 20V milling machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 700mm x 180mm table. With minimal modification this kit would also fit the Warco WM18
  42. Part No:DRO-030-M73-MMM
    £534.00 ( £445.00 Ex. VAT)

    Mill not included. DRO kit only. The M-DRO 3 axis DRO kit custom designed to fit onto the Chester Machine Tools Champion 16V milling machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 500mm x 140mm table. With minimal modification this kit would also fit the Warco WM14.
  43. Part No:DRO-220-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools Centurion 3 in 1 Machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 500mm between centre model.
  44. Part No:DRO-315-L72-MM
    £454.61 ( £378.84 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Colchester Triumph 2000 long bed lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 50 inch between centre model.
  45. Part No:DRO-310-L72-MM
    £434.60 ( £362.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Colchester Triumph 2000 lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 30inch between centre model.
  46. Part No:DRO-160-M72-MM
    £425.00 ( £354.17 Ex. VAT)

    Mill not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools 626 turret milling machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 660mm x 152mm table. With minimal modification this kit would also fit the Warco VMC.
  47. Part No:DRO-040-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Pre Order Now and Save 5% or Please Contact Us For Stock Details

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools DB7VS model lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 300mm between centre model. With minimal modification this kit would also fit the Warco WM180 lathe.
Loading...
Please wait...