Shopping Basket

0 item - £0.00

You have no items in your shopping cart.

Compare Products

You have no items to compare.

All Dedicated Lathe Kits

Our full range of all of our Dedicated Lathe Kits

All Dedicated Lathe Kits

  1. Part No:DRO-NE-03-014
    £561.60 ( £468.00 Ex. VAT)
    Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Colchester Master, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 40" between centre lathe.
  2. Part No:DRO-012-L72-MM
    £439.99 ( £366.66 Ex. VAT)
    The M-DRO 2 axis DRO kit design to the Myford ML7 and Super 7 hobby lathe with integrated cross slide encoder. The cross slide encoder requires the cross slide to be removed. To allow a block to be fitted to the end and a slot machining in the underside. All other mountings do not require any drilling or modification to the lathe. Step by step install guide. Suitable for the standard bed length.
  3. Part No:DRO-BR-525
    £39.95 ( £33.29 Ex. VAT)
    The upgrade replaces the bolt on cross slide encoder supplied in the M-DRO Myford digital readout kit with an imbedded magnetic tape and extension piece. Which frees up the left side of the cross slide and allows better access to the saddle locking bolt. This will involve tapping the cross slide with two M6 fixings and machining a slot 2mm deep by 10mm wide and 180-200mm in length.
  4. Part No:DRO-295-L72-MM
    £437.00 ( £364.17 Ex. VAT)
    The M-DRO 2 axis DRO kit custom designed to fit onto the Colchester Bantam lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 30 inch between centre model.
  5. Part No:DRO-290-L72-MM
    £425.00 ( £354.17 Ex. VAT)
    The M-DRO 2 axis DRO kit custom designed to fit onto the Colchester Bantam lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 20 inch between centre model.
  6. Part No:DRO-270-L72-MM
    £425.00 ( £354.17 Ex. VAT)
    The M-DRO 2 axis DRO kit custom designed to fit onto the Colchester Chipmaster lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 20 inch between centre model.
  7. Part No:DRO-NE-03-010
    £525.00 ( £437.50 Ex. VAT)
    Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Myford Super 7, Sigma and Connoisseur lathe the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest workshop conditions. Suitable for the 20" between centre lathe.
  8. Part No:DRO-015-L72-MM
    £469.99 ( £391.66 Ex. VAT)
    The M-DRO 2 axis DRO kit design to fit directly onto the Super 7 long bed hobby lathe. The DRO kit will simply bolt on with NO DRILLING required and uses some of the existing fixings on the machine. Step by step guide for a quick install. Suitable for the long bed length.
  9. Part No:DRO-250-L72-MM
    £425.00 ( £354.17 Ex. VAT)
    The M-DRO 2 axis DRO kit custom designed to fit onto the Myford 254 lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 550mm between centre model.
  10. Part No:DRO-NE-03-017
    £537.60 ( £448.00 Ex. VAT)
    Newall’s NMS300 Digital Readout System sets the standard for reliability, value and ease of use. Specifically designed to be fitted to the Colchester Chipmaster, the NMS300 DRO System includes Newall’s Spherosyn300 and Microsyn300 encoders. Newall’s inductive encoders are simple to install and designed to provide consistent accuracy and reliability even under the harshest work shop conditions. Suitable for the 20" between centre lathe.
Loading...
Please wait...