Shopping Basket

0 item - £0.00

You have no items in your shopping cart.

Compare Products

You have no items to compare.

Machine Specific DRO Kits

Machine Specific DRO Kits

  1. Part No:DRO-BR-525
    £39.95 ( £33.29 Ex. VAT)

    The upgrade replaces the bolt on cross slide encoder supplied in the M-DRO Myford digital readout kit with an imbedded magnetic tape and extension piece. Which frees up the left side of the cross slide and allows better access to the saddle locking bolt. This will involve tapping the cross slide with two M6 fixings and machining a slot 2mm deep by 10mm wide and 180-200mm in length.
  2. Part No:DRO-040-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Pre Order Now and Save 5% or Please Contact Us For Stock Details

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools DB7VS model lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 300mm between centre model. With minimal modification this kit would also fit the Warco WM180 lathe.
  3. Part No:DRO-120-M72-MM
    £425.00 ( £354.17 Ex. VAT)

    Mill not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools Eagle 25 milling drilling machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 585mm x 190mm table.
  4. Part No:DRO-270-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Colchester Chipmaster lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 20 inch between centre model.
  5. Part No:DRO-300-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Boxford MKII and MKIII Model A, Model B and Model C engineers lathe with the T slotted cross slide. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. An easy fit cross slide option with the encoder bolting on from the top face.
  6. Part No:DRO-100-M72-MM
    £425.00 ( £354.17 Ex. VAT)

    Mill not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools Champion 20V milling machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 700mm x 180mm table. With minimal modification this kit would also fit the Warco WM18
  7. Part No:DRO-050-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools DB10 Super (B) model lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 550mm between centre model. Please note this kit is suitable for the cross slide with the T slots set inwards 15mm from the edge.
  8. Part No:DRO-130-M72-MM
    £425.00 ( £354.17 Ex. VAT)

    Mill not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools Eagle 30 milling drilling machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 730mm x 210mm table.
  9. Part No:DRO-290-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Colchester Bantam lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 20 inch between centre model.
  10. Part No:DRO-160-M72-MM
    £425.00 ( £354.17 Ex. VAT)

    Mill not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools 626 turret milling machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 660mm x 152mm table. With minimal modification this kit would also fit the Warco VMC.
Loading...
Please wait...