Shopping Basket

0 item - £0.00

You have no items in your shopping cart.

Compare Products

You have no items to compare.

Machine Specific DRO Kits

Machine Specific DRO Kits

  1. Part No:DRO-010-L72-MM
    £439.99 ( £366.66 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit design to fit directly onto the Myford ML7 and Super 7 hobby lathe. The DRO kit will simply bolt on with NO DRILLING required and uses some of the existing fixings on the machine. Step by step guide for a quick install. Suitable for the standard bed length.
  2. Part No:DRO-270-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Colchester Chipmaster lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 20 inch between centre model.
  3. Part No:DRO-017-L72-MM
    £469.99 ( £391.66 Ex. VAT)

    The M-DRO 2 axis DRO kit design to the Myford ML7 and Super 7 hobby lathe with integrated cross slide encoder. The cross slide encoder requires the cross slide to be removed. To allow a block to be fitted to the end and a slot machining in the underside. All other mountings do not require any drilling or modification to the lathe. Step by step guide for a quick install. Suitable for the Long bed length.
  4. Part No:DRO-056-L72-MM
    £445.01 ( £370.84 Ex. VAT)

    Pre Order Now and Save 5% or Please Contact Us For Stock Details

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools DB10 Super MKII long bed model lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 750mm between centre model. Please note this kit is suitable for the cross slide with the T slots set inwards 8mm from the edge.
  5. Part No:DRO-015-L72-MM
    £469.99 ( £391.66 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit design to fit directly onto the Super 7 long bed hobby lathe. The DRO kit will simply bolt on with NO DRILLING required and uses some of the existing fixings on the machine. Step by step guide for a quick install. Suitable for the long bed length.
  6. Part No:DRO-BR-525
    £39.95 ( £33.29 Ex. VAT)

    The upgrade replaces the bolt on cross slide encoder supplied in the M-DRO Myford digital readout kit with an imbedded magnetic tape and extension piece. Which frees up the left side of the cross slide and allows better access to the saddle locking bolt. This will involve tapping the cross slide with two M6 fixings and machining a slot 2mm deep by 10mm wide and 180-200mm in length.
  7. Part No:DRO-220-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools Centurion 3 in 1 Machine. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 500mm between centre model.
  8. Part No:DRO-302-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Boxford MKII and MKIII Model A, Model B and Model C engineers lathe with the T slotted cross slide. A specific kit that integrates the cross slide encoder, to install the encoder the cross slide will need to be removed. To allow a block to be fitted to the end and a slot machining in the underside. Complete kit with CNC machined brackets and step by step, full colour install guide to assist with the installation.
  9. Part No:DRO-050-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Chester Machine Tools DB10 Super (B) model lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 550mm between centre model. Please note this kit is suitable for the cross slide with the T slots set inwards 15mm from the edge.
  10. Part No:DRO-290-L72-MM
    £425.00 ( £354.17 Ex. VAT)

    Lathe not included. DRO kit only. The M-DRO 2 axis DRO kit custom designed to fit onto the Colchester Bantam lathe. A specific kit with CNC machined brackets and step by step, full colour install guide to assist with the installation. Suitable for the 20 inch between centre model.
Loading...
Please wait...