Laser Center/ Edge Finder - 10mm Shank with dot style laser

Part No
MT-EDL-BDT-OR10
Place On Back Order Now or Please Contact Us For Stock Details
laser center/edge finder
£117.68
Overview
Laser Center/ Edge Finder - 10mm Shank with dot style laser
  • Shank size - 10mm
  • Laser type - Dot
  • Overall Length - 95mm/ 3 13/16"
  • Adjustable Polarizer - dims and brightens the laser as required
  • Included with the Edge Indicator - Storage Case and manual
  • Repeatability - Approximately 0.02mm/ 1/1000"
  • Batteries - 3x SR44 batteries (not supplied)
  • Operational distance - 25-300mm/ 1-12"

Designed to replace traditional wigglers and mechanical or electronic edge finders in most setup operations.

Precision edge finding without readjusting for radius of edge finding tool.

Quickly locate center punch marks or scribe line intersections.

Can be used with drill presses, to set mill head angle, realign lathe tailstock after taper cutting, lathes with 4-jaw chuck setup or to align the vice on the mill table.


 

More Information
Weight(g)87.000000
TypeEdge Finder
Brandlaser center/edge finder
MPNMT-EDL-BDT-OR10
GTIN5055396143386
Write Your Own Review
You're reviewing:Laser Center/ Edge Finder - 10mm Shank with dot style laser
Your Rating
Customer Questions
please could you tell me what wavelength this laser is? Thanks. Emma
The wavelength is 650nm
Please can you conform the dot size from 2m distance and is it adjustable
The range is only 25-400mm, and would not be usable at a 2m distance. Please could you advise what you are looking to use it for, we may be able to offer an alternative item.
Did you find what you were looking for?