M-DRO EH-05 - 1350mm (54") Reading Length Magnetic Linear Encoder

Part No
In stock
£223.14 £185.95
M-DRO EH-05 linear magnetic encoder with 1350mm (54") reading length. A compact encoder profile suitable for a wide range of machine tool, XY tables, jigs and metrology applications. The encoder beam can be cut to length to suit install.
  • Ultra compact size makes the EH-05 ideal for limited space mounting, including the lathe cross or compound slide and milling machine quill.
  • A non contact system with fully sealed encapsulated reading head. Highly resistant to cutting oil and contamination.
  • Fitted with a flexible armoured cable and connector. Additional interfaces are available to combine axis or convert the output to suit other manufacturer's equipment.
  • The rigid support profile has a recessed slot for the tape, with a stainless steel cover strip that slides in over the top to fully cover the tape.
  • The profile is pre-drilled with mounting holes. Additional fixings can also be drilled as required.
  • The profile can easily be cut to length to best suit the install requirements.
  • For compatible display consoles please check the display console compatibility guide below. Please feel free to contact our technical staff for assistance.

  • Reading Length - 1350mm (54")
  • Resolution - 0.005mm
  • Encoder Type - Magnetic
  • Encoder Output - TTL (A, B and Z) Quadrature
  • Cable Type - Flexible Armoured
  • Cable Length - 3 Metres 
  • Protection - IP67 

M-DRO EH-05 Magnetic Linear Encoder - technical.pdf


Additional Information
More Information
TypeLinear Encoder
Write Your Own Review
You're reviewing:M-DRO EH-05 - 1350mm (54") Reading Length Magnetic Linear Encoder
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?