- Ultra compact size makes the EH-05 ideal for limited space mounting, including the lathe cross or compound slide and milling machine quill
- A non contact system with fully sealed encapsulated reading head. Highly resistant to cutting oil and contamination
- Fitted with a flexible armoured cable and connector. Additional interfaces are available to combine axis or convert the output to suit other manufacturer's equipment
- The rigid support profile has a recessed slot for the tape, with a stainless steel cover strip that slides in over the top to fully cover the tape
- The profile is pre-drilled with mounting holes. Additional fixings can also be drilled as required
- The profile can easily be cut to length to best suit the install requirements
- For compatible display consoles please check the display console compatibility guide below. Please feel free to contact our technical staff for assistance
- Reading Length - 950mm (38inch)
- Encoder Type - Magnetic
- Encoder Output - TTL (A, B and Z) Quadrature
M-DRO EH-05 linear magnetic encoder with 950mm (38") reading length. A compact encoder profile suitable for a wide range of machine tool, XY tables, jigs and metrology applications. The encoder beam can be cut to length to suit install.
Additional Information
- M-DRO EH-05 Magnetic Linear Encoder - technical
- Linear Encoder Comparison - technical
- Display Console Compatibilty Guide - technical
- Digital Readout Selection Guide - technical
- On-site Installation Service Guide - area map
Key Specifications
Cable Type - Flexible Armoured
Cable Length - 3 Metres
Weight(g) | 941.000000 |
---|---|
Type | Linear Encoder |
Brand | M-DRO |
MPN | DRO-EH-05-950 |
GTIN | 5055396132946 |
Condition | new |