COVID19 Update – All UK and International orders processing normally - Our Showroom remains closed until further notice.

Machine DRO ME-CAL-INT-500 Digital Caliper Special Jaw 20-500mm (0.8-20 inch)

Part Number
ME-CAL-INT-500
In stock
£139.57 £116.31
Overview
Suitable for brake drum measurement. Two sets of depth pegs allow measurement to be accurately taken at two heights. Allowing Inside Odd Leg measurements. Constructed from Stainless Steel, Hardened and Ground Frame. UKAS Calibration Available. Data output: No
  • 20-500mm (0.8-20 inch) range Special Jaw Digital Caliper
  • 0.01mm (0.0005inch) resolution. +/-0.07mm (+/-0.002 inch) accuracy
  • Conforms to Factory/Manufacturers Standard
  • UKAS Calibration Available
  • Inside Odd Leg measurements can be taken
  • Stainless Steel, Hardened and Ground Frame
  • Fine Adjust Thumb Wheel to control the slider movement
  • Standard functions; Inch/Metric Conversion, On/Off, Auto Power Off, Zero Setting, Low Battery Alert
  • Advanced functions; n/a

The n/a 20-500mm (0.8-20 inch) Special Jaw Digital Caliper offers standard functions such as Inch/Metric Conversion, On/Off, Auto Power Off, Zero Setting, Low Battery Alert. Along with the advanced functions of n/a. The caliper is constructed from Stainless Steel, Hardened and Ground Frame with a Fine Adjust Thumb Wheel.


Additional Information

Key Specifications

Range: 20 - 500mm (0.8 -20 inch)

Resolution: 0.01 mm (0.0005 inch)

Accuracy: +/-0.07mm (+/-0.002 inch)

Jaw Length: mm

Battery Type: SR44

Data Output: No

Typical Applications

Mechanical Engineering, Research & Laboratory Applications, Educational and training Sector, Automotive Engineering, Engine Building, General Machine and Workshop Measurement and more.

More Information
Weight(g)2575.000000
TypeDigital Caliper
BrandMachine DRO
MPNME-CAL-INT-500
Conditionnew
Accuracy Imperial[inch]+/-0.002
Accuracy Metric[mm]+/-0.07
Battery TypeSR44
Data OutputNo
Display TypeDigital
Caliper ConstructionStainless Steel
Jaw ConfigurationInside Odd Leg
Thumb WheelFine Adjust Thumb Wheel
Measurement UnitsMillimetre/Inch
Resolution Imperial[inch]0.0005
Resolution Metric[mm]0.01
UKAS Calibration IncludedUKAS Calibration Available
Repeatability[inch]+/-0.0005
Repeatability[mm]+/-0.010
Min Measurement Range [mm]20
Max Measurement Range [mm]500
Min Measurement Range [inch]0.8
Max Measurement Range [inch]20
Sub TypeSpecial Jaw
Write Your Own Review
You're reviewing:Machine DRO ME-CAL-INT-500 Digital Caliper Special Jaw 20-500mm (0.8-20 inch)
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?