The M-DRO SDS3-1 offers a high performance single input display console
Durable front panel membrane with tactile switches and robust die cast housing
Large easy to read LED display
Functions include; Metric/ imperial conversion, datum entry, radius/ diamter display
The console is supplied with a 10mm diameter pin with M10 nut, to secure to a suitable mounting arm. These are available separately
For compatible encoder please check the encoder compatibility guide below
Please feel free to contact our technical staff for assistance
M-DRO SDS3-1 Single Axis Display Console
This 1 axis model allow up to 1 linear encoder to be connected. Additional interfaces are available to combine/sum two encoders into a single console input or to convert the input to suit other manufacturers equipment. Please see the encoder compatibility guide below
Hello Good morning.
I have a dro-sds3-1,and one of my operaters have messed about with the function keys, it's is now doubling the size, I do not know to change this any help greatly appreciate.
There are two likely causes for this. Either Diameter mode has been selected, press the R/D key to toggle on/off or the resolution has been set incorrectly. The resolution needs to match the encoder, this is most likely 5um. during power up press the...
Hi
I have recently purchased one of these DRO units and would like to know if you have a PDF copy pf the user manual available.
Best regards
Richard Gore
Optimax
Yes this is available, we have emailed this to you. Many thanks