Single axis input display console for rotary encoders or magnetic tape rings. The readout can display either decimal degrees or degrees, minutes and seconds. Industrial standard quadrature TTL encoder input. This display is only suitable for angle readout not linear travel.
Our Mini Single Axis Console offer a simple display solution for angle and rotary measurement
Housed in a very compact and robust case
The console ideal as a stand-alone display or fit along side an existing system to provide an additional independent display
The rotary encoder and external power supply are connected to the rear of the console with only a few basic set up parameters required - these include encoder resolution and count direction
This display is only suitable for angle readout not linear travel. Please see parts DRO-MG-MDU-1UN and DRO-MG-MDU-1X
Easy read 14mm high LED display
Input voltage - 9 volts DC (PSU included)
Current - 150 mA
Encoder input - Quadrature TTL
M-DRO a leading brand of positional readouts and encoder technologies, featuring both optical and magnetic sensor types for a wide range of applications. Supported by a UK design and development engineering team, with many years’ experience in the measurement and automation industry.
hi how is this calibrated ?// no mention on your write up
There is a calculation needed for the resolution. This depends on the line counts and the number of turns. We do have a range of rotary encoders, if required we just need to know what resolution (and the number of turns if not direct drive).