Cross Slide DRO Encoder Upgrade for the Myford ML7 and Super 7 Lathe Digital Readout Bolt on Kit

Part No
DRO-BR-525
Rating:
100% of 100
In stock
M-DRO
£39.95
Overview
The upgrade replaces the bolt on cross slide encoder supplied in the M-DRO Myford digital readout kit with an imbedded magnetic tape and extension piece. Which frees up the left side of the cross slide and allows better access to the saddle locking bolt. This will involve tapping the cross slide with two M6 fixings and machining a slot 2mm deep by 10mm wide and 180-200mm in length.
  • An upgrade to the bolt on Myford DRO suitable for kits with part numbers DRO-010-L72-MM and DRO-015-L72-MM
  • The upgrade replaces the bolt on cross slide encoder supplied in the standard Myford DRO kit with imbedded magnetic tape
  • Suitable for the Myford ML7 and Super 7 lathes including the long bed versions
  • Free's up the left side of the cross slide and allows better access to the saddle locking bolt
  • Only requires removal of the cross slide from the saddle. Then drilling and tapping the extension block and machining a 10mm by 2mm deep slot.
  • The brackets fit directly onto the existing parts from the bolt kit, making for an easier upgrade
  • UK written user manual and full colour, step by step install guides

We offer an extensive range of Digital Readout equipment from most of the major manufacturers. This allows the most suitable options of consoles and encoders to be selected; based on functionality, price, and available mounting space. Both linear and rotary encoders are available in a variety of compact profile options. We stock a large range of adaptor cables and interfaces to allow simple replacement of damaged/faulty existing equipment for most manufacturers. A PC based DRO interface and axis summing interfaces are also available. Please feel free to contact our technical staff for further advice, or to arrange an on-site install by one of our engineers (uk only).


 

More Information
Weight(g)180.000000
TypeEncoder Upgrade
BrandM-DRO
MPNDRO-BR-525
GTIN5056202934631
Conditionnew
Write Your Own Review
You're reviewing:Cross Slide DRO Encoder Upgrade for the Myford ML7 and Super 7 Lathe Digital Readout Bolt on Kit
Your Rating
Customer Questions
good evening, i'm only have 40mm clearance between the wall and the end of the cross slide, would this be able to fit even if it needs changing? Rob
Hi Rob,  In the kit is an extension block, this would add 65mm to the overlength of the cross slide. You would need to check if the cutting tool would be able to reach the centre when the cross slide with the block fitted. I would expect it to ...
Did you find what you were looking for?