Edge Technology Multi Axis Stop

Part No
ME-ED-48-000
Rating:
100% of 100
In stock
Edge Technology
£78.16
Overview
The Multi Axis Stop is designed so that it stays completely below the top surface of the vice which means it will not interfere with cutting tool paths. It can be mounted on any available T-slot anywhere along the milling machine table allowing it to accurately locate a workpiece for any type of setup.
  • Unique design stays completely below the top surface of vice jaws for cutter clearance.
  • Stop rod stays parallel to the milling machine table so workpiece will contact rod face squarely for increased accuracy.
  • Versatile design allows the 5/16" hardened stop rod to be quickly and accurately positioned.
  • Large 1/2-13" socket head cap screws rigidly clamp the unit in position after adjustments are made.
  • Base of unit is keyed to T-slot in table.
  • T-nut included.

The Multi Axis Stop by Edge Technology has a design that stays completely below the top surface of the vise which means it will not interfere with cutting tool paths. It will also keep the stop rod square to the workpiece throughout the entire range of motion. This configuration provides a more consistent locating surface for increased part accuracy. It can be mounted on any available T-slot anywhere along the milling machine table allowing it to accurately locate a workpiece for any type of setup.


 

More Information
Weight(g)1134.000000
TypeMulti Axis Stop
BrandEdge Technology
MPN48-000
GTIN5055396166835
Conditionnew
Write Your Own Review
You're reviewing:Edge Technology Multi Axis Stop
Your Rating
Customer Questions
Edge Technology Multi Axis Stop - what is the size of the T slot nut ( widest and narrowest + top and bottom flange )on this product and the diameter (in mm) of the securing cap head bolt? It would help if that info was in the details or more information sections ... thanks, Mike
T nut dimensions: Narrow width (top): 15.3mm Widest width (bottom): 25.4mm Bolt dimeter: 12.7mm
Did you find what you were looking for?