Edge Technology Pro Tram System With 1/2 Inch Shank

Part No
ME-ED-01-000
Rating:
100% of 100
In stock
Edge Technology
£102.16
Overview

Edge Technology Pro Tramming Gauge for accurately setting milling head square

  • Square the head of a milling machine quickly and easily
  • Simply lower unit to the table and adjust the head until both indicators read the same
  • Sized perfectly to fit the bed of a 6" vice allowing the head to be trammed to the vice instead of the table
  • Can be used with a sine bar or sine plate to adjust the head to precise angles
  • Calibration procedure accounts for any error introduced by worn collets
  • Guaranteed to be equal to or better than any other tramming method or spindle squaring device available
  • Large 2.2" easy to read indicator face
  • Body made from red anodized aluminium
  • Includes calibration gauge and padded case
  • Shank Size - 1/2 inch

The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate - Tramming is the process of squaring the head of your mill to the table. Most machinists know that if your mill is not trammed properly, surface finishes will be poor and parts will not be flat or square. Most machinists also know that conventional tramming techniques can be tedious and time consuming. The Pro Tram solves these issues allowing you to tram your mill quickly and accurately. To use the Pro Tram simply lower the unit down onto the table and adjust the head until both indicators read the same number. Repeat this process for the opposite axis and you are done. The Pro Tram is also sized perfectly to fit the bed of a 6 inch vice allowing you to tram the head to the vice instead of the table. If you want to spend less time tramming your mill and more time machining parts then you need the Pro Tram by Edge Technology.


 

Key Specifications

Graduation - 0.001inch

Gauge repeatability - 0.0002 inch

Between Centres - 5 inch

More Information
Weight(g)950.000000
TypeTramming
BrandEdge Technology
MPN01-000
GTIN5055396109382
Conditionnew
Write Your Own Review
You're reviewing:Edge Technology Pro Tram System With 1/2 Inch Shank
Your Rating
Customer Questions
I have a pro tram system and have the misfortune to have revolved may milling m/c spindle with the unit fitted. The tips of both DTI units has Brocken off at the screw in thread. Can I purchase two replacement tips directly from you, if not can you advice other options. Regards Geoff morgan
These are available as spare part ME-ED-SP-000, this are not currently listed online but we have emailed a quotation to you directly.
Did you find what you were looking for?