- Minimum value holding function that allows you to easily detect a hole diameter
- Analogue bar graph in the display (12 different scales switchable)
- The analogue bar graph enhances usability by adding a dial gauge ¢‚¬œfeel¢‚¬� to digital measurement
- GO/‚±NG tolerance judgement function
- A fast measurement frequency mode(detection cycle 20ms or 50times/s) is selectable to measure in the peak detection mode more reliably
- Easy indicator setup via a setup menu
- A USB interface box can be used to set up the indicator from PC via dedicated software
Mitutoyo History - Celebrating over 80 years in the Metrology industry! Mitutoyo started from humble beginnings in 1934 in Japan and are now recognised as a world leading manufacturer of measuring tools such as micrometers, calipers, and system instrument products such as co-ordinate measuring instruments, form measurement instruments and optical measuring instruments
Key Specifications
Range: 0.5"/12.7 mm
Range: 0.5" [Inch]
Max. Permissible Error E MPE: 0.0001"/0.003 mm
H MPE (Hysteresis): 0.0001"/0.002 mm
R MPE (Repeatability): 0.0001"/0.002 mm
Type: EN ISO Standard
Measuring force: ‰¤ 1.5 N
Protection: IP42
Mass_ 170 g
Display: LCD, character height: 8 mm, rotatable 330°
Max. response speed: Unlimited
Measurement frequency (MAX/MIN/RANGE): Standard mode: 10 times/s fast mode: 50 times/s (plunger speed max. 50 µm/s for peak measurement)
Alarm: Low voltage, composition error, overflow error, tolerance limit setting error
Stem ˜: 8 mm
Contact point: Carbide ball, thread M 2.5 x 0.45 mm
Battery life: Standard mode: approx. 1 year fast mode: approx. 4.5 month
Power supply: 1 battery CR-2032
DATA/HOLD: Yes
PRESET 3x_ Yes
MIN Value Hold: Yes
ON/OFF: Yes
Function lock: Yes
GO/±NG judgement: Yes
Digital/Analog_ Digital
Inch-Metric: Inch/Metric
Data output: Yes
Delivered: Including 1 battery
Dimensions
